Epoxy Based Repair Anchorage and Installation Mortar EPODOL

About Epoxy Based Repair Anchorage and Installation Mortar EPODOL

Epoxy Based, Repair, Anchorage and Installation Mortar
APPLICATION FIELD

It is used in the installation of all kinds of iron ores, placement of anchoring elements, repair and insulation of concrete cracks, injections to the cracks, insulation of the cracks, repairs of all kinds of structural concretes, and installation and bonding of all kinds of metal parts to concrete or steel. It is also used for bonding of joint and chamfer tapes.

APPLICATION

SURFACE PREPARATION

The surface of application shall always be free of form oil, dust, paint and materials that reduce adherence. Corrosion on metal surfaces shall be removed and contact with mortar shall be prevented using an anti-corrosion agent.

PREPARATION AND APPLICATION OF THE MORTAR

EPODOLis packed with appropriate quantities consisting of 2 components. Two components shall be mixed for 3 minutes at least with mixer drill with a speed of 400-600 rpm until a homogeneous mixture is obtained.

EPODOL may be applied to the surface with trowel or scraper.

Holes drilled while installing the ores shall be thoroughly cleaned with air and the hole to be drilled shall be 6 mm wider than the reinforcement to be installed.

Material may be applied easily with a mortar gun.

MIXING RATIOS

Component A 3.75 kg Epoxy resin

Component B 1.25 kg Epoxy hardener